Прошивка flytouch 3 superpad 2 скачать

PO41 flytouch 3 superpad firmware download.

Attached Files. superpad3black (6).jpg 76.03KB 138 downloads superpad3black (1).jpg 94.55KB 127 downloads superpad3black (4).jpg 67.51KB 114 downloads. #4 ray1970. This firmware update(android version 2.2 V2.6:#4402) is for the SuperpadII/Flytouch3 black shell witch come with the android version 2.2 V0.6:#4402 and model P041 and update process is little different. The files:logo.bin,ramdisk,system,uImage,updater should be in the folder name"android" and the file u-boot-nand.bin in the root of micro sd card.Black shell flytouch3/superpadII.

Edited by ray1970, 31 July 2011 - 12:38 PM. #5 Bloggs. thanks mate i could'nt work out why after a flash all games were still there now i know the flash only consisted of the nand only the rest were not active as they were not in a folder. #6 ray1970. I've got a question. does it still perform the update if you don't have the u-boot-nand.bin in the root, just the other files in the 'android' folder.

The reason i ask is the u-boot-nand.bin sounds like it might be a bootloader file, and it *COULD* be dangerous to reload the bootloader if it isn't necessary. #7 ray1970. This firmware update(android version 2.2 V2.6:#4402) is for the SuperpadII/Flytouch3 black shell witch come with the android version 2.2 V0.6:#4402 and model P041 and update process is little different. The files:logo.bin,ramdisk,system,uImage,updater should be in the folder name"android" and the file u-boot-nand.bin in the root of micro sd card.Black shell flytouch3/superpadII. #8 up4sd. Are you sure this new firmware just can work with the Black FT3. have you tried the sliver FT3 with PO41 MODEL. This firmware update(android version 2.2 V2.6:#4402) is for the SuperpadII/Flytouch3 black shell witch come with the android version 2.2 V0.6:#4402 and model P041 and update process is little different.

The files:logo.bin,ramdisk,system,uImage,updater should be in the folder name"android" and the file u-boot-nand.bin in the root of micro sd card.Black shell flytouch3/superpadII. #9 ray1970. Are you sure this new firmware just can work with the Black FT3. have you tried the sliver FT3 with PO41 MODEL. #10 fractalmyth. Hi, I am a complete newbie - got my Superpad III for my birthday 4 days ago. thanks to you guys and google I managed to wifi it to my laptop, installed a pile of apps & was playing along very happily. Yesterday I used a USB stick to copy some music and txt files to its TF card. It wasn't happy when I tried to unmount the stick - I may have done it too quickly? - and it froze in mypad. I eventually pushed the reset button and it went back to working nicely.

At the end of the day I turned it off & plugged it in to recharge. This morning, when I try to turn it on, it shows the swirly screen, then the little penguin, and then stops on the screen that says Android World and won't go any further. It was purchased from China through ###########(I am in Australia). The box says SuperPadIII, the little book it came with says MID Manual, the Model number on the about screen said P041 and there is a glittery sticker on the screen that says 4GB. It is silver and has one TF slot.

I'm going batty searching around trying to work out what to do next. Please help! Step by step instructions or links to same would be greatly appreciated. This is the only link I have found to P041 firmware - and you say it is for 8 or 16GB versions only. do you know of ANY hope for the 4GB. #11 ray1970.

Hi, I am a complete newbie - got my Superpad III for my birthday 4 days ago. thanks to you guys and google I managed to wifi it to my laptop, installed a pile of apps & was playing along very happily. Yesterday I used a USB stick to copy some music and txt files to its TF card. It wasn't happy when I tried to unmount the stick - I may have done it too quickly? - and it froze in mypad. I eventually pushed the reset button and it went back to working nicely. At the end of the day I turned it off & plugged it in to recharge. This morning, when I try to turn it on, it shows the swirly screen, then the little penguin, and then stops on the screen that says Android World and won't go any further. It was purchased from China through ###########(I am in Australia). The box says SuperPadIII, the little book it came with says MID Manual, the Model number on the about screen said P041 and there is a glittery sticker on the screen that says 4GB.

It is silver and has one TF slot. I'm going batty searching around trying to work out what to do next. Please help! Step by step instructions or links to same would be greatly appreciated. This is the only link I have found to P041 firmware - and you say it is for 8 or 16GB versions only. do you know of ANY hope for the 4GB.